Drossing Flux

Drossing Flux (SATA-PF-310)
Description of Drossing Flux (SATA-PF-310)
SATA drossing flux also name aluminum drossing flux is specially developed for removing the slag from the aluminium melt before or after refining procedure. It is for in- furnace use. The slag after treatment is dry ,loose, easy to be removed.
Apperance: White or gray white in powder
Application temperature: 700-780 ℃
a)More choice for your option,
b)1. Sodium-free drossing flux which suitable for High magnesium al-alloy.
c)2. Eco-friendly drossing flux with less emission
Advantage of drossing flux for aluminum (SATA-PF-310)
Mild Exothermic flux; separate the aluminium with the dross. Decomposition of alumina in slag, to make the slag dry and loose, easy for removing.
Enhance the aluminium melt purity, improve the alloy properties greatly, and reduce metal loss.
Reduce the slag formed on the furnace linings and bottom. Damage of furnace can be avoided. Increase the service life of furnace. Save the labor and power loss in furnace cleaning due to frequency of cleaning is minimized.
Sodium free drossing flux can avoid the white spot to be occurred on the surface of alumininum and its alloy.
Eco-friendly drossing flux with less emission is benefit for workers, enviorment with high efficiency.
Package of Drossing Flux (SATA-PF-310)
2.5kg or 5.0kg PE bag, 20～25kg PP bag or 20-25kg cartons.
Dosage of Drossing Flux (SATA-PF-310)
0.2%~0.5% of molten aluminium weight, adjust the dosage according to furnace type and purity of furnace charge.
Storage of Drossing Flux (SATA-PF-310)
Store in a dry and cool place with good ventilation. Original packing should be kept until ready to use.

评论

发表评论

此博客中的热门博文

Main Components of Deslagging Agent

图片
The main components of deslagging agent are potassium, chlorine and fluorine. Among them, JKCZ-1 and JKCZ-2 all contain sodium, while JKCZ-3 does not contain sodium. The deslagging agent  produced by our company alleviates the disadvantageous factors of iron oxide to melt lime. The slag remover is adopting pre-melting process of calcium oxide, alumina and iron oxide and by pressing ball process. Because of the pre-melting process, calcium oxide is melted in advance, and calcium ferrite and calcium aluminate are formed in advance with iron oxide and alumina, which can reduce the heat needed for converter melting and shorten the melting time. The composite minerals formed by ferric oxide and alumina and calcium oxide have low melting point and fast melting speed, which can promote the quick melting of lime in converter. The alumina content of this product is different from that of pre-melting refining agent, and its price is relatively low. The product can reduce the use of conv...
阅读全文

Degassing Flux

图片
Degassing Flux  (SATA-PF-350) General Description of Degassing Flux (SATA-PF-350) Practice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of the casting, but also the source of the crack, so it is important part that removing the hydrogen during the smelting process. SATA-degassing flux   also name aluminum degassing flux   is   a kind of traditional high efficiency degassing flux for aluminium and its alloys, it used for removing hydrogen and oxides from the aluminium melting. Application of Degassing Flux (SATA-PF-350) Plunge suitable quantity flux to the bottom (100mm from the bottom is better) of the melt, evenly and slowly remove the lunch, make the flux fully react with aluminium molten, stand or stir the molten for 10-15 min, the hydrogen and oxide will be taken out of aluminium molten. Advantage of Degassing Flux (SATA-PF-350) Easy operation, There ...
阅读全文

Covering Flux Characteristics You Don't Know

图片
  The covering flux is a covering material that can extend the solidification time of the molten metal in the riser and cover the surface of the molten metal in the riser during casting production. There are two types of covering fluxes: thermal insulation covering fluxes and heat-generating covering fluxes.  We provide refining flux , alumina ceramic foam filter , grain refiner for aluminium , magnesium flux , electrode flux material an d s o on.   The characteristics of the covering flux are as follows:   1. The thermal insulation covering flux is made of low thermal conductivity materials, such as expanded perlite, expanded graphite, etc.   2. In addition to the low thermal conductivity material, the heating covering flux is added with a certain proportion of heating materials. Under the heat of the molten metal, the oxidant provides oxygen to oxidize the reducing agent and generates heat, thereby prolonging the solidification time of the molten metal in...
阅读全文