satafluxes

  The quality of deslagging agent for aluminium casting produced by our company has been proved by actual use, and the effect has reached the level of similar products abroad. Because all domestic raw materials are used for local production, the price is far lower than that of imported products. Since it was put into the market, it has been affirmed and trusted by domestic and foreign customers. The products are now exported to Korea, India, Japan, Thailand, Taiwan, and other countries and regions. Deslagging agent for aluminium casting  is simple and convenient to use. It is usually sprayed on the surface of molten metal after the casting process is filled with foam. It can also be used in an electric heating furnace. It should be sprinkled on the surface of the molten metal before the melting is finished and the slagging on the surface can be picked out by steel brazing. If the slag content is too much, it can be repeated once. The amount of slag used depends on the slag con...

General description of Recovering Flux Recovering flux is a flux specifically designed for the purpose of treating hot drosses, which is the insufficient separation of the metal. Melt entrapped aluminum in hot dross due to its intense exothermic action. It applies to all types of dross from different alloys. The dross and the recovering flux should be added alternatively in sandwich fashion  The advantage of Recovering Flux 1. This flux has an excellent effect on hot skim. help extract maximum aluminum from hot dross, 2. It’s strongly exothermic which causes entrapped aluminum in hot dross to melt. 3. Produces dry powdery dross. promote high metal recovery, reduce oxide build-up, and remove non-metallics from the melt 4. It’s a cost-saving flux with low addition rate & quickly reaction.