SATA - Professional Potassium Aluminium Fluoride Supplier

 SATA is one of the professional potassium aluminum fluoride suppliers, and can provide you with high-quality potassium aluminum fluoride. Potassium aluminum fluoride produced by SATA can be used as a flux in auxiliary aluminum smelting to reduce or remove the magnesium content in the melt or maximize the metal recovery rate, which is a flux in the metal industry; it can also be used to make grinding wheels (Filler/binder) and other abrasive products.

 

Potassium aluminum fluoride (PAF), inorganic salt; also known as potassium cryolite, potassium aluminum fluoride, KAIF. PAF is a kind of high pure inorganic molten salt, which is widely used in industrial production. PAF is often used as filler in the production of abrasives ; it is used as a salt flux in metal processing industry to maximize the metal recovery rate of secondary molten aluminum; at the same time, it can also be used as an additive to accelerate the dispersion and reduce the magnesium content in liquid aluminum alloy.

 

Next, we will introduce the application of potassium aluminum fluoride in abrasive products:

 

PAF binds the abrasive to the surface of the abrasive tool and plays the role of the binder. The material used as binder must have enough bond strength to prevent abrasive from falling off or damaging the surface of the workpiece, and also have enough toughness to be lower than the axial force and radial force produced during grinding. In addition, PAF can quickly export the heat generated on the workpiece to keep the it cool, thus preventing oxidation. The chemical contact between PAF and the workpiece surface also enhances the grinding performance.

 

PAF is mainly used for resin bonded abrasives, especially phenolic resin bonded abrasives. Among them, the binder includes a series of bonding components: resin, cryolite, PAF, and pyrite. Cryolite and PAF can keep the grinding surface cool and prevent surface oxidation.

 


评论

发表评论

此博客中的热门博文

Main Components of Deslagging Agent

图片
The main components of deslagging agent are potassium, chlorine and fluorine. Among them, JKCZ-1 and JKCZ-2 all contain sodium, while JKCZ-3 does not contain sodium. The deslagging agent  produced by our company alleviates the disadvantageous factors of iron oxide to melt lime. The slag remover is adopting pre-melting process of calcium oxide, alumina and iron oxide and by pressing ball process. Because of the pre-melting process, calcium oxide is melted in advance, and calcium ferrite and calcium aluminate are formed in advance with iron oxide and alumina, which can reduce the heat needed for converter melting and shorten the melting time. The composite minerals formed by ferric oxide and alumina and calcium oxide have low melting point and fast melting speed, which can promote the quick melting of lime in converter. The alumina content of this product is different from that of pre-melting refining agent, and its price is relatively low. The product can reduce the use of conv...
阅读全文

Degassing Flux

图片
Degassing Flux  (SATA-PF-350) General Description of Degassing Flux (SATA-PF-350) Practice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of the casting, but also the source of the crack, so it is important part that removing the hydrogen during the smelting process. SATA-degassing flux   also name aluminum degassing flux   is   a kind of traditional high efficiency degassing flux for aluminium and its alloys, it used for removing hydrogen and oxides from the aluminium melting. Application of Degassing Flux (SATA-PF-350) Plunge suitable quantity flux to the bottom (100mm from the bottom is better) of the melt, evenly and slowly remove the lunch, make the flux fully react with aluminium molten, stand or stir the molten for 10-15 min, the hydrogen and oxide will be taken out of aluminium molten. Advantage of Degassing Flux (SATA-PF-350) Easy operation, There ...
阅读全文

Covering Flux Characteristics You Don't Know

图片
  The covering flux is a covering material that can extend the solidification time of the molten metal in the riser and cover the surface of the molten metal in the riser during casting production. There are two types of covering fluxes: thermal insulation covering fluxes and heat-generating covering fluxes.  We provide refining flux , alumina ceramic foam filter , grain refiner for aluminium , magnesium flux , electrode flux material an d s o on.   The characteristics of the covering flux are as follows:   1. The thermal insulation covering flux is made of low thermal conductivity materials, such as expanded perlite, expanded graphite, etc.   2. In addition to the low thermal conductivity material, the heating covering flux is added with a certain proportion of heating materials. Under the heat of the molten metal, the oxidant provides oxygen to oxidize the reducing agent and generates heat, thereby prolonging the solidification time of the molten metal in...
阅读全文