Description of the Function of Aluminum Alloy Flux

 Ⅰ. Fluxes for aluminum alloys are used in production

Fluxes for aluminum alloys are widely used in the production of primary aluminum and secondary aluminum to improve the quality of the melt and the recovery rate of metallic aluminum.

 

Ⅱ. The role of fluxes for aluminum alloys

1. Fluxes for aluminum alloys can change the wettability of aluminum melt to oxide (aluminum oxide), making aluminum melt easy to separate from oxide (aluminum oxide), so that most of the oxide (aluminum oxide) enters the fluxes for aluminum alloys and reduces the oxide content in the melt.

 

2. Fluxes for aluminum alloys can change the state of the oxide film on the surface of the melt. This is because it can break the solid and dense oxide film on the surface of the melt into fine particles, which is beneficial for the hydrogen in the melt to permeate and escape from the particle gaps of the oxide film and enter the atmosphere.

 

3. The existence of the fluxes for aluminum alloys layer can isolate the contact between the water vapor in the atmosphere and the aluminum melt, make it difficult for hydrogen to enter the aluminum melt, and at the same time prevent the melt from oxidizing and burning.

 

4. Fluxes for aluminum alloys can absorb the oxides in the aluminum melt, so that the melt can be purified.

 

JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY has an independent flux formulation development department, which can provide different formulations according to customer needs to meet various needs of customers. The granular molten aluminum alloy flux independently developed by our company is a new type of environmental protection type flux, there is no dust and smoke emission during use, conforms to international environmental protection standards, and improves the working environment of workers. The use of this flux is low and can save costs. Customers are welcome to come and buy.

 


评论

发表评论

此博客中的热门博文

Main Components of Deslagging Agent

图片
The main components of deslagging agent are potassium, chlorine and fluorine. Among them, JKCZ-1 and JKCZ-2 all contain sodium, while JKCZ-3 does not contain sodium. The deslagging agent  produced by our company alleviates the disadvantageous factors of iron oxide to melt lime. The slag remover is adopting pre-melting process of calcium oxide, alumina and iron oxide and by pressing ball process. Because of the pre-melting process, calcium oxide is melted in advance, and calcium ferrite and calcium aluminate are formed in advance with iron oxide and alumina, which can reduce the heat needed for converter melting and shorten the melting time. The composite minerals formed by ferric oxide and alumina and calcium oxide have low melting point and fast melting speed, which can promote the quick melting of lime in converter. The alumina content of this product is different from that of pre-melting refining agent, and its price is relatively low. The product can reduce the use of conv...
阅读全文

Degassing Flux

图片
Degassing Flux  (SATA-PF-350) General Description of Degassing Flux (SATA-PF-350) Practice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of the casting, but also the source of the crack, so it is important part that removing the hydrogen during the smelting process. SATA-degassing flux   also name aluminum degassing flux   is   a kind of traditional high efficiency degassing flux for aluminium and its alloys, it used for removing hydrogen and oxides from the aluminium melting. Application of Degassing Flux (SATA-PF-350) Plunge suitable quantity flux to the bottom (100mm from the bottom is better) of the melt, evenly and slowly remove the lunch, make the flux fully react with aluminium molten, stand or stir the molten for 10-15 min, the hydrogen and oxide will be taken out of aluminium molten. Advantage of Degassing Flux (SATA-PF-350) Easy operation, There ...
阅读全文

Covering Flux Characteristics You Don't Know

图片
  The covering flux is a covering material that can extend the solidification time of the molten metal in the riser and cover the surface of the molten metal in the riser during casting production. There are two types of covering fluxes: thermal insulation covering fluxes and heat-generating covering fluxes.  We provide refining flux , alumina ceramic foam filter , grain refiner for aluminium , magnesium flux , electrode flux material an d s o on.   The characteristics of the covering flux are as follows:   1. The thermal insulation covering flux is made of low thermal conductivity materials, such as expanded perlite, expanded graphite, etc.   2. In addition to the low thermal conductivity material, the heating covering flux is added with a certain proportion of heating materials. Under the heat of the molten metal, the oxidant provides oxygen to oxidize the reducing agent and generates heat, thereby prolonging the solidification time of the molten metal in...
阅读全文