Usage and Dosage of Deslagging Agent for Aluminium Casting

 The quality of deslagging agent for aluminium casting produced by our company has been proved by actual use, and the effect has reached the level of similar products abroad. Because all domestic raw materials are used for local production, the price is far lower than that of imported products. Since it was put into the market, it has been affirmed and trusted by domestic and foreign customers. The products are now exported to Korea, India, Japan, Thailand, Taiwan, and other countries and regions.


Deslagging agent for aluminium casting is simple and convenient to use. It is usually sprayed on the surface of molten metal after the casting process is filled with foam. It can also be used in an electric heating furnace. It should be sprinkled on the surface of the molten metal before the melting is finished and the slagging on the surface can be picked out by steel brazing. If the slag content is too much, it can be repeated once. The amount of slag used depends on the slag content of molten iron and the quality requirement of castings. One ton of molten iron is 1-1.5kg. It is used to remove slag from molten iron and spread it on the surface of molten metal. It will spread and cover the surface of molten metal automatically. It will decrease with the pouring of molten iron, and it will not stick or hang the package. After the molten iron is poured, the covering layer is picked out by steel brazing or left on the surface of the remaining liquid metal for thermal insulation.

JINZHOU SATA FUSED FLUXES AND NEW MATERIALS FACTORY is a professional enterprise specializing in the production and development of various metal fluxes, aluminum alloy additives, aluminum slag scavengers, deslagging agents for aluminium casting, various aluminum-based master alloys, cast aluminium alloys and supporting equipment for molten aluminium. The company combines the characteristics of the industry to develop a variety of new products, can customize special specifications of products according to customer requirements, and provide casting technology solutions.

 

 


评论

发表评论

此博客中的热门博文

Main Components of Deslagging Agent

图片
The main components of deslagging agent are potassium, chlorine and fluorine. Among them, JKCZ-1 and JKCZ-2 all contain sodium, while JKCZ-3 does not contain sodium. The deslagging agent  produced by our company alleviates the disadvantageous factors of iron oxide to melt lime. The slag remover is adopting pre-melting process of calcium oxide, alumina and iron oxide and by pressing ball process. Because of the pre-melting process, calcium oxide is melted in advance, and calcium ferrite and calcium aluminate are formed in advance with iron oxide and alumina, which can reduce the heat needed for converter melting and shorten the melting time. The composite minerals formed by ferric oxide and alumina and calcium oxide have low melting point and fast melting speed, which can promote the quick melting of lime in converter. The alumina content of this product is different from that of pre-melting refining agent, and its price is relatively low. The product can reduce the use of conv...
阅读全文

Degassing Flux

图片
Degassing Flux  (SATA-PF-350) General Description of Degassing Flux (SATA-PF-350) Practice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of the casting, but also the source of the crack, so it is important part that removing the hydrogen during the smelting process. SATA-degassing flux   also name aluminum degassing flux   is   a kind of traditional high efficiency degassing flux for aluminium and its alloys, it used for removing hydrogen and oxides from the aluminium melting. Application of Degassing Flux (SATA-PF-350) Plunge suitable quantity flux to the bottom (100mm from the bottom is better) of the melt, evenly and slowly remove the lunch, make the flux fully react with aluminium molten, stand or stir the molten for 10-15 min, the hydrogen and oxide will be taken out of aluminium molten. Advantage of Degassing Flux (SATA-PF-350) Easy operation, There ...
阅读全文

Covering Flux Characteristics You Don't Know

图片
  The covering flux is a covering material that can extend the solidification time of the molten metal in the riser and cover the surface of the molten metal in the riser during casting production. There are two types of covering fluxes: thermal insulation covering fluxes and heat-generating covering fluxes.  We provide refining flux , alumina ceramic foam filter , grain refiner for aluminium , magnesium flux , electrode flux material an d s o on.   The characteristics of the covering flux are as follows:   1. The thermal insulation covering flux is made of low thermal conductivity materials, such as expanded perlite, expanded graphite, etc.   2. In addition to the low thermal conductivity material, the heating covering flux is added with a certain proportion of heating materials. Under the heat of the molten metal, the oxidant provides oxygen to oxidize the reducing agent and generates heat, thereby prolonging the solidification time of the molten metal in...
阅读全文