Cover Flux

Cover Flux(SATA-PF-340)
General Description of Cover Flux (SATA-PF-340)
The aluminium melt is extremely easy oxidation and inhale when it is in melting. A flux is required to have low melting, low density, good humidity, and can form a dense uniform protective film, which we called it cover flux.
SATA-cover flux also name cover flux aluminium  is used for covering of molten aluminium, it can form a cover layer on the surface of molten for prevent the molten aluminium react to oxidation.
Application of Cover Flux (SATA-PF-340)
Use Instruction: flux for aluminum melting can added at one time before refining or it can added in two batches,first add half cover flux to the molten aluminium and stir the melt and make the flux fully react to molten, then skimming the dross and spread the balance on the surface of the aluminium molten.
Advantage of Cover Flux (SATA-PF-340)
It can prevent the aluminium molten react with oxygen in the air.
It is a eco-friendly flux, less fume during working
It can separate the dross from aluminium molten, reduce metal loss
Low working temperature, suitable for kinds of furnace
Specification of Cover Flux (SATA-PF-340)
White mixed powder.
Aluminium melting temperature: 650-750℃.
Recommended Dosage: 1.5-3kgs/ton aluminium molten, 0.8-1.0kg/m2 of melt area. it should adjust according to the purity and air humidity.
Package:
Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized
Stored in dry, well-ventilated place, and avoid direct sunlight，keep sealed before using.
Package of Cover Flux (SATA-PF-340)
Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
Stored in dry, well-ventilated place, and avoid direct sunlight，keep sealed before using.

NOTE: This flux has serious hygroscopicity, please use immediately after opening.

评论

发表评论

此博客中的热门博文

Main Components of Deslagging Agent

图片
The main components of deslagging agent are potassium, chlorine and fluorine. Among them, JKCZ-1 and JKCZ-2 all contain sodium, while JKCZ-3 does not contain sodium. The deslagging agent  produced by our company alleviates the disadvantageous factors of iron oxide to melt lime. The slag remover is adopting pre-melting process of calcium oxide, alumina and iron oxide and by pressing ball process. Because of the pre-melting process, calcium oxide is melted in advance, and calcium ferrite and calcium aluminate are formed in advance with iron oxide and alumina, which can reduce the heat needed for converter melting and shorten the melting time. The composite minerals formed by ferric oxide and alumina and calcium oxide have low melting point and fast melting speed, which can promote the quick melting of lime in converter. The alumina content of this product is different from that of pre-melting refining agent, and its price is relatively low. The product can reduce the use of conv...
阅读全文

Degassing Flux

图片
Degassing Flux  (SATA-PF-350) General Description of Degassing Flux (SATA-PF-350) Practice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of the casting, but also the source of the crack, so it is important part that removing the hydrogen during the smelting process. SATA-degassing flux   also name aluminum degassing flux   is   a kind of traditional high efficiency degassing flux for aluminium and its alloys, it used for removing hydrogen and oxides from the aluminium melting. Application of Degassing Flux (SATA-PF-350) Plunge suitable quantity flux to the bottom (100mm from the bottom is better) of the melt, evenly and slowly remove the lunch, make the flux fully react with aluminium molten, stand or stir the molten for 10-15 min, the hydrogen and oxide will be taken out of aluminium molten. Advantage of Degassing Flux (SATA-PF-350) Easy operation, There ...
阅读全文

Covering Flux Characteristics You Don't Know

图片
  The covering flux is a covering material that can extend the solidification time of the molten metal in the riser and cover the surface of the molten metal in the riser during casting production. There are two types of covering fluxes: thermal insulation covering fluxes and heat-generating covering fluxes.  We provide refining flux , alumina ceramic foam filter , grain refiner for aluminium , magnesium flux , electrode flux material an d s o on.   The characteristics of the covering flux are as follows:   1. The thermal insulation covering flux is made of low thermal conductivity materials, such as expanded perlite, expanded graphite, etc.   2. In addition to the low thermal conductivity material, the heating covering flux is added with a certain proportion of heating materials. Under the heat of the molten metal, the oxidant provides oxygen to oxidize the reducing agent and generates heat, thereby prolonging the solidification time of the molten metal in...
阅读全文