Powder Refining Flux

Powder Refining Flux (SATA-PF-330)
General Description of Powder Refining Flux (SATA-PF-330)
For aluminium alloys, since the Al has strong chemical activity, the inclusions and gases are easily generated during the smelting process, and they are distributed inside the alloy after solidification of the melt, which will reduce the alloy’s quality, It is necessary of removing the oxide inclusion, enhance the casting quality and avoid defects in the casting.
SATA-refining flux also name aluminium flux powder, which used for removing non-metallic inclusions from aluminium molten, it also will form a layer that efficiently prevents the aluminium molten from reacting with generating hydrogen pick-up and oxides from the air.
There are two options: One is general refining flux with emission. Another one is fewer fumes during working.
Application of Powder Refining Flux (SATA-PF-330)
The flux can be added by manually spreading or added by an injection equipment, when added it by an injection equipment, with the help of nitrogen or argon and flux, the oxide and hydrogen also can be removed , the injection time required is 15-20 minutes, after refining, impurities will float up to the surface.
Advantage of Powder Refining Flux (SATA-PF-330)
Less dosage, Eco-friendly and less fume
Low working temperature, it can fully react with aluminium molten
Easy operation, it can added by manually and injection equipment
Excellent performance in removing oxide inclusions and drossing from aluminium melt
There are sodium free recipe refining flux, suitable for high mg content aluminium alloy, avoid or reduce the white spots on the surface of aluminium and aluminium alloys, improve the product quality
Specification of Powder Refining Flux (SATA-PF-330)
White mixed powder
Dosage: Recommended dosage is 1-5kg per ton of aluminium molten weight, please contact the seller to get exact dosage according the aluminium products
Working temperature is 650℃ to 750℃
Package of Powder Refining Flux (SATA-PF-330)
Packed in 5kg (PE), 25kg (PP), 1000kg bags or customized.
Stored in dry, well-ventilated place, and avoid direct sunlight, keep sealed before using.

NOTE: This flux has serious hygroscopicity, please use immediately after opening


评论

发表评论

此博客中的热门博文

Main Components of Deslagging Agent

图片
The main components of deslagging agent are potassium, chlorine and fluorine. Among them, JKCZ-1 and JKCZ-2 all contain sodium, while JKCZ-3 does not contain sodium. The deslagging agent  produced by our company alleviates the disadvantageous factors of iron oxide to melt lime. The slag remover is adopting pre-melting process of calcium oxide, alumina and iron oxide and by pressing ball process. Because of the pre-melting process, calcium oxide is melted in advance, and calcium ferrite and calcium aluminate are formed in advance with iron oxide and alumina, which can reduce the heat needed for converter melting and shorten the melting time. The composite minerals formed by ferric oxide and alumina and calcium oxide have low melting point and fast melting speed, which can promote the quick melting of lime in converter. The alumina content of this product is different from that of pre-melting refining agent, and its price is relatively low. The product can reduce the use of conv...
阅读全文

Degassing Flux

图片
Degassing Flux  (SATA-PF-350) General Description of Degassing Flux (SATA-PF-350) Practice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of the casting, but also the source of the crack, so it is important part that removing the hydrogen during the smelting process. SATA-degassing flux   also name aluminum degassing flux   is   a kind of traditional high efficiency degassing flux for aluminium and its alloys, it used for removing hydrogen and oxides from the aluminium melting. Application of Degassing Flux (SATA-PF-350) Plunge suitable quantity flux to the bottom (100mm from the bottom is better) of the melt, evenly and slowly remove the lunch, make the flux fully react with aluminium molten, stand or stir the molten for 10-15 min, the hydrogen and oxide will be taken out of aluminium molten. Advantage of Degassing Flux (SATA-PF-350) Easy operation, There ...
阅读全文

Covering Flux Characteristics You Don't Know

图片
  The covering flux is a covering material that can extend the solidification time of the molten metal in the riser and cover the surface of the molten metal in the riser during casting production. There are two types of covering fluxes: thermal insulation covering fluxes and heat-generating covering fluxes.  We provide refining flux , alumina ceramic foam filter , grain refiner for aluminium , magnesium flux , electrode flux material an d s o on.   The characteristics of the covering flux are as follows:   1. The thermal insulation covering flux is made of low thermal conductivity materials, such as expanded perlite, expanded graphite, etc.   2. In addition to the low thermal conductivity material, the heating covering flux is added with a certain proportion of heating materials. Under the heat of the molten metal, the oxidant provides oxygen to oxidize the reducing agent and generates heat, thereby prolonging the solidification time of the molten metal in...
阅读全文