satafluxes

General description of Recovering Flux Recovering flux is a flux specifically designed for the purpose of treating hot drosses, which is the insufficient separation of the metal. Melt entrapped aluminum in hot dross due to its intense exothermic action. It applies to all types of dross from different alloys. The dross and the recovering flux should be added alternatively in sandwich fashion  The advantage of Recovering Flux 1. This flux has an excellent effect on hot skim. help extract maximum aluminum from hot dross, 2. It’s strongly exothermic which causes entrapped aluminum in hot dross to melt. 3. Produces dry powdery dross. promote high metal recovery, reduce oxide build-up, and remove non-metallics from the melt 4. It’s a cost-saving flux with low addition rate & quickly reaction.

In some alloys, magnesium is present only as a permitted impurity within limits, and significant amounts may be detrimental. Demag flux is application for the removal of excess magnesium from aluminium alloys. it is a magnesium removing flux suitable for use with aluminium alloys where the magnesium content is over specification.

General Description & Functions of Furnace Cleaning Flux Furnace cleaning flux can remove oxide build-up from furnace wall due to its strong exothermic action.  The product of Furnace Cleaning Flux The lining of the aluminum melting furnace frequently becomes coated with a considerable build-up of dross-type material on the furnace walls. the volume of furnace hearth gradually decreases Subsequently.it is mainly for application to the walls and roof of reverberatory and rotary furnaces Advantages of Furnace Cleaning Flux 1. Furnace cleaning fluxes is a strongly exothermic product, with its strong exothermic and striping action, the residues on the walls are loosing and can be removed easily by scraping tools. 2. It has strong heat generation and striping action can be entrapped in aluminum to melt and run down to the furnace hearth.

General description and function of Degassing-Flux （In order to increase the mechanical properties of the aluminum alloys, it is necessary to reduce the pinhole porosity arising out of hydrogen presence, as well as increase the nucleation sites for better microstructure. ） Presence of hydrogen in solidification leads to pinhole defect, excessive porosity, lower metal density, and reduced mechanical properties. Degassing flux es composed of chlorine and fluorine containing salts are used for degassing of aluminum alloy shaped in tablets form. Degassing products remove hydrogen dissolved in the molten alloy. degassing flux can also remove non-metallic impurities (oxides, carbides, etc.) from the metal, creating a better-finished product. Advantage of Degassing-Flux 1. Degassing flux release nitrogen gas, which has a very positive effect of removal of hydrogen entrapped during melting operations and for oxides, micro-oxides and impurities reduction 2. Has a ...

General Description And Function of Drossing-Off Flux Drossing-off flux is used to absorb oxides and non-metallic material, cleansing the metal and forming a good metal-free dross which can easily be removed.  Drossing-off fluxes agglomerate the oxides allowing easy removal from the surface of the melt. They are used to remove the dross with the minimum metal loss  Advantages of Drossing-Off Flux 1. Being exothermic fluxes, it can ensure that liquid aluminum trapped in the dross layer is returned to the melt. Produce dry powdery dross.  2. Provide further decrease of the flux melting point and improve its cleaning ability. Due to the high wetting capacity of fluoride compounds: it has a good effect of contributes to oxide – metal separation.  3. It helps recover metal from this slag layer , improving the yield of the process.

General Description of Reclaimed Fluxes Reclaimed fluxes is a strongly exothermic flux and used as covering and drossing flux , recovery of grindings, skimmings, turnings and dirty scrap, effectively used to remelt heavily contaminated scrap, minimize the melting losses associated with the melting of chips, turnings, and borings. Advantages of Reclaimed Fluxes 1. Remove oxide built-up on furnace linings and crucibles, providing dry, easily removable dross 2. It is a strongly exothermic flux, reduce the rich metallic content of drosses. 3. It is also used as covering and drossing flux for the hearth type furnaces  4. Removes suspended oxide from the melt.

C sf2 is an alkaline-based, sodium-free flux . It is a smoke-generating cover flux for all aluminum alloys, especially silicon-aluminum. It is used as an exothermic cover and drossing flux for aluminum-magnesium alloys melted in reverb furnaces. C SF2 will promote an improved separation of the dross and the molten aluminum and will not lead to sodium pick-up. C SF2 is a powerful, reactive flux to improve the modification of the aluminum. Sodium free cover fluxes are used for melting hyper-eutectic aluminum-silicon alloys (alloys containing above 12.6% of Si). Hyper-eutectic alloys are modified by phosphorus, additions of which cause refining of the primary crystals of silicon. Sodium reduces the refining effect of phosphorus in such alloys.

C sf1 is fused flux which does not contain any form of sodium salt and does not cause the alloy to be brittle, suitable for all kinds of aluminum and aluminum alloy including high-magnesium alloy(1-10%magnesium), the covering agent can form a protective layer on the surface of the melt to prevent oxidation and hydrogen absorption of the melt surface, remove the oxide and non-metallic inclusions by the heat cleaning action of the melt, The formation of slag metal content is low, with a strong melting effect, the oxide deposition onto the crucible furnace wall was significantly reduced Advantages of Covering Flux-Csf1 1. Forming a dense protective layer, reducing the involvement of the gas 2. Reduces the metal loss caused by oxidation of the liquid on the surface 3. Low cost with the low dosage, reducing of aluminum contains in the dross 4. Excellent performance in the covering effect. 5. Effectively prevent the oxidation of magnesium in the alloy 6. Does not ...

The function of Covering Flux- C11 C11 is fused flux , suitable for all kinds of aluminum and aluminum alloy except those containing high-magnesium alloy, the covering agent can form a protective layer on the surface of the melt to prevent oxidation and hydrogen absorption of the melt surface, remove the oxide and non-metallic inclusions by the heat cleaning action of the melt, The formation of slag metal content is low, with a strong melting effect, the oxide deposition onto the crucible furnace wall was significantly reduced Advantages of Covering Flux- C11 1. Forming a dense protective layer, reducing the involvement of the gas. 2. Reduces the metal loss caused by oxidation of the liquid on the surface 3. Low cost with the low dosage, reducing of aluminum contains in the dross 4. Excellent performance in the covering effect.

General Description of Granulated Fuse Flux GRANULAR FLUX is synthetic binary salt based on de-hydrated salts in form granular & spherical  Melting Point: 432℃ Color: light yellow and light grey Size of Granulated Fuse Flux Granule 0.8-3.25mm, 1-4mm,1-5mm,1-10mm Spherical 0.15-0.6mm, 1-2mm, 0.6-1mm  Other size can be adjusted according to customer request. The function of Granulated Fuse Flux Removal of alkali metals (Sodium, Calcium, and Lithium), non-metallic inclusions & Hydrogen during melting and foundry of Aluminum and Aluminum alloys, especially Al/Mg alloys. Chemical Composition: kmgcl3, k2mgcl4, k3mgcl7 Packing of Granulated Fuse Flux 1. 2.0kg or 2.5kg or 5kg heat sealed polyethylene (PE) bags into 20 or 25kgs bags or cartons with or without pallet  2. Special packing may be offered on request  Benefits of Granulated Fuse Flux Free of fluorides. no fluoride emissions. HCl and particu...

General Description of Multi-Functional Flux MULTI-FUNCTIONAL FLUX is blended from natural de-hydrated salts with temperature reactive compounds. Melting Point: 420℃ Color: light grey or light yellow Size of Multi-Functional Flux Granule 0.8-3.25mm, 1-4mm,1-5mm,1-10mm Spherical 0.15-0.6mm, 1-2mm, 0.6-1mm  Other size can be adjusted according to customer request. The function of Multi-Functional Flux Refining, drossing, degassing and covering in one flux. Powdery dross after refining . Environment-friendly, the absence of toxic and harmful chemicals, the complete absence of dust and very low dosage. It is a granulated flux for universal applications and multi-purpose functions which forms a molten layer to protect the melt from oxidation and pick up hydrogen, produces the drossing effect which agglomerates the oxide allowing easy removal from the surface of the melt. is recommended for use with aluminum-magnesium alloys containing magnesium l...

General Description of Sodium-Free Refining Flux Aluminum alloys containing more than 2 % magnesium become brittle with sodium. This flux is a compact covering and cleaning granulated flux, which generates low dust and low fume during application. it reacts quickly with molten aluminum and removes the alkali metal (Ca, Na, Li, Sr) and non-metallic inclusions (oxides, carbides, borides)and degassing. This flux is used in hypo-eutectic aluminum alloys including those contain high magnesium alloy. It designed for producing wheel hubs, pistons and the aluminum alloy who is intolerant of sodium. Melting Point: 423℃ Color: off-white color Size of Sodium-Free Refining Flux Granule 0.8-3.25mm, 1-4mm,1-5mm,1-10mm Spherical 0.15-0.6mm, 1-2mm, 0.6-1mm  Other size can be adjusted according to customer request. Function of Sodium-Free Refining Flux The sodium-free flux that can be used for all aluminum alloys for degassing, covering and drossing. It also r...

General Description of High-Efficiency And Non-Toxic Refining Flux High-efficiency and non-toxic refining flux are synthetic binary salt in forms of granule, spherical and powder.  Melting Point: 480℃ Color: light grey or light yellow Size of High-Efficiency And Non-Toxic Refining Flux  Granule 0.8-3.25mm, 1-4mm,1-5mm,1-10mm Spherical 0.15-0.6mm, 1-2mm, 0.6-1mm  Other sizes can be adjusted according to customer request. The function of High-Efficiency And Non-Toxic Refining Flux  Reacts quickly and efficiently to remove sodium, lithium, and calcium from molten aluminum and aluminum alloys, as well as from refractory furnace linings. High efficiency and non-toxic emission. Packing of High-Efficiency And Non-Toxic Refining Flux   1. 2.0kg or 2.5kg or 5kg heat sealed polyethylene (PE) bags into 20 or 25kgs bags or cartons with or without pallet  2. Special packing may be offered on request  Benefits o...

General Description of 1# Flux 1# Flux is synthetic binary salt in forms of granule, spherical and powder.  Melting Point: 480℃ Color: off-white  Size of 1# Flux Granule 0.8-3.25mm, 1-4mm,1-5mm,1-10mm Spherical 0.15-0.6mm, 1-2mm, 0.6-1mm  Other size can be adjusted according to customer request. Function Size of 1# Flux Used for refining all series alloys and pure aluminum except those containing high magnesium.it applies to reverberatory, rotary, tilter and large electric resistance furnace. This flux can effectively remove hydrogen and oxide inclusions in the melt.  Packing of 1# Flux 1. 2.0kg or 2.5kg or 5kg heat sealed polyethylene (PE) bags into 20 or 25kgs bags or cartons with or without pallet  2. Special packing may be offered on request  Benefits of 1# Flux 1. Excellent performance in degassing and drossing 2. Good fluidity, handling and charging easier and safer 3. Strong ability ...

Aluminum is one of the lightest metals in the world. It’s also very strong, extremely flexible and corrosion resistant. Light, durable and functional. Since aluminum easily forms compounds with other chemical elements, a huge variety of aluminum alloys have been developed. Even a very small amount of admixtures can drastically change the properties of the metal, making it possible to use it in new areas. aluminum has become a symbol of progress: all cutting-edge devices and vehicles are made of aluminum.  However, there is another property that is just as significant: aluminum can be reused over and over again. Both aluminum and its alloys can be melted down and reused without any detriment to its mechanical properties. About 75% of aluminum produced in the time that the aluminum industry has existed is still in use today. The salt flux is widely used in the production of aluminum and secondary aluminum, improving the melt quality and the recovery of metal aluminum. The fu...